Filter
Top Products
11Mbps Wireless Internet Broadband Router
16
Figure 3-3 The “Home” page of the Utility Menu Screen
3.2.1 PPPoE Connection for WAN
If your ISP uses PPPoE (Point-to-Point Over Ethernet) to establish communications
with end-users, you will receive information such as User Name and Password from
them. To set up a PPPoE connection for WAN, follow the instructions as shown in
Figure 3-4 Cable/DSL Setup Menu Screen and Figure 3-5 Cable/DSL Setup Menu with
“No” Option Screen. Then, you need to configure the following values to make your
router work. (See Figure 3-6 PPPoE Menu Screen)
- User Name and Password
Fill in the entries with the information you get from your ISP.
- Service Name
If your ISP provides this info, please type it into the field.
- Connect on Demand
If you have been disconnected due to inactivity, Connect on Demand will enable
you to establish a connection again between your Router and ISP.