Filter
Top Products
3-10
Disassembly and Reassembly
Service Manual
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 3-2)
- Drive Ass’y(see page 3-5)
- Engine Shield Ass’y(see page 3-6)
2. Remove the Pick up Gear Ass’y, as shown
below.
3. Remove the Pick up Ass’y, as shown below.
Pick up Gear
Ass'y
Pick up Ass'y
1
2
Bush
3.13 Pick Up Roller
3.14 Solenoid
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 3-2)
- Drive Ass’y(see page 3-5)
- Engine Shield Ass’y(see page 3-6)
- Pick Up Roller(see page 3-10)
2. Remove two screw then remove The Manual
Solenoid and Pick Up Solenoid.
(Pick up)
Solenoid
(Manual)
Solenoid