Filter
Top Products
Setup Procedures
18
After connecting the CRW2200IX drive to the computer (or an IEEE daisy-chain or
tree), you can verify that the drive is correctly recognized by your computer.
Windows Users
For Windows 98 Second Edition/Me
Open “Control Panel” and double-click on the “System” icon. Select the “Device
Manager” tab. If you can find a new CD drive icon (YAMAHA CRW2200E), an
IEEE1394 bus controller icon, and an SBP2 icon as shown below, you have
successfully installed both the drive and the IEEE1394 interface card as Windows OS
recognizes both devices.
If the devices are not recognized, read the instructions on P. 13 - P. 17 carefully and
repeat the setup procedures.
* This is a screen shown in the Windows Me environment.
For Windows 2000 Professional
You can verify by opening “Control Panel,” double-clicking on “System,” selecting the
“Hardware” tab, and clicking on the “Device Manager” button in “System Properties.”
Notes
• For details about how to use the operating system, refer to the documentation that came
with it.
• If there is an or mark, etc., next to the icon for the CRW2200IX drive or the
IEEE1394 bus controller, this means that it has not been installed correctly. In either case,
the CRW2200IX drive may not work properly.
Configuring for the Operating System
00GB-.book Page 18 Wednesday, June 27, 2001 7:24 PM