Filter
Top Products
Operation
21
You can load and eject a disc (as described below) only when the CRW2200IX drive
is turned on.
1
11
1 Open the disc tray by pressing the eject button on the CRW2200IX
drive’s front panel.
2
22
2 Place the disc onto the disc tray with its label or printing facing upward.
3
33
3 Close the disc tray by pressing the eject button again. You can also
gently push it closed.
Load or unload the disc after the disc tray has fully opened. Do not push or
pull the disc tray using excessive force. Doing so can damage the drive or
the disc.
1
11
1 Open the disc tray by pressing the eject button on the CRW2200IX
drive’s front panel.
2
22
2 Remove the disc from the disc tray.
3
33
3 Close the disc tray by pressing the eject button again. You can also
gently push it closed.
Loading a Disc
Ejecting a Disc
12
12
00GB-.book Page 21 Wednesday, June 27, 2001 7:24 PM