Filter
Top Products
Verifying the Hardware Installation
Windows Users
1 When the computer’s operating system is loading, your SCSI adapter card
will be recognized and you will be prompted to install the drivers for it.
Follow the on-screen instructions and choose to reboot your computer at the
end of the driver installation procedure.
n For further details about installing the drivers for your SCSI adapter card, refer to the
documentation that came with it. Also refer to the documentation that came with your
computer’s operating system.
2
After the computer’s operating system has loaded, open the Control Panel and
double-click on the System icon. Select the Device Manager tab and double-click
on CDROM. If the drive has been correctly installed, it should be listed as
shown below. Similarly, double-click on SCSI controllers and the SCSI adapter
card should be listed as shown below if it has been properly installed.
n For more information about how to use the operating system, refer to the documentation that
came with it.
n If there is a or mark etc. next to the icon for the CRW6416SX drive or the SCSI
adapter card, this means that it has not been installed correctly.
20
Setting Up The CRW6416SX Drive
CRWSX_e.qx 7/8/99 3:08 PM Page 27