Filter
Top Products
Using the CRW-70 Drive as a CD-R/RW Drive (When Connected to a Computer)
24
Install the CD writing software that came with the CRW-70 drive.
For details about how to install and use the software, refer to the
documentation that came with it.
The CRW-70 drive can be connected to or disconnected from your computer
even when the computer is turned on (hot plug).
When removing the CRW-70 drive with the computer turned on, or when
turning off the drive with the computer connected, follow the steps below.
1
11
1
Exit the CD writing software, if it is running.
2
22
2
Be sure to remove the disc from the drive, if a disc is loaded.
3
33
3
With Windows 98 Second Edition, you can disconnect the drive.
With Windows Me/2000 Professional or Windows XP, start
“Unplug or Eject Hardware” or “Safety Remove Hardware” on
the taskbar, respectively, and then perform the necessary steps to
disconnect the drive.
* This screen is an example on Windows Me.
When writing, be sure not to disconnect the USB cable from the CRW-70 drive, or to
disconnect or connect any USB devices from/to the computer.
STEP
4 Install the CD Writing Software
Disconnecting the CRW-70 Drive
Note