Filter
Top Products
17
• The CRW-F1UX drive needs to be connected to the USB port on the computer.
The drive connected to the computer via a USB hub may not operate properly.
• When the CRW-F1UX drive is connected to a USB 1.1-compliant port on the
computer, the drive operates with USB 1.1 specifications. (P. 10)
Installation of the device drivers starts automatically when the CRW-F1UX drive is
connected to the computer.
The device drivers need to be installed only once when first installing the device.
For Windows XP/2000 Professional/Me
The device drivers of the operating system standard are installed automatically.
For Windows 98 Second Edition
Install the device drivers with the included CD-ROM “CRW-F1 SOFTWARE
DISC.”
For details, refer to the separate manual “Windows 98 Second Edition USB CD-
ROM Device Driver Installation Guide” for the CRW-F1UX drive.
The device drivers are required to be installed for each USB port. If the drive is connected
to a USB port where the device drivers have not yet been installed, a message to install
the device driver will be shown.
After connecting the CRW-F1UX drive to the computer, follow the steps below to
check that the drive is recognized properly by the computer.
For Windows XP
1
Select Start on the task bar, then Control Panel, System, Hardware tab, and
Device Manager. The Device Manager dialog box appears.
If the System icon is not shown in the Control Panel window, click Switch to
Classic View on the left side of the window.
Note
2 Install the Device Drivers
Note
3 Check Recognition of the CRW-F1UX Drive
Note
Continued on next page