Filter
Top Products
23
Troubleshooting
1 The CRW-F1UX drive is not turned on when the power switch is ON.
(The power LED does not light.)
●
Are the AC adapter and the power cable connected properly?
Turn off the power switch and check that the CRW-F1UX drive, the AC adapter, the
power cable, and the AC outlet are connected properly. (P. 13, 14)
If not, connect them properly, and then turn on the CRW-F1UX drive.
If the CRW-F1UX is not turned on (the power LED does not light) even if they are
connected properly, contact the store of purchase or your nearest Yamaha dealer
(listed at the back of this manual).
2 The operating system does not start up properly.
●
Is the USB 2.0 interface card installed properly?
Refer to the instruction for the USB 2.0 interface card.
3 The CRW-F1UX drive is not recognized by the operating system. (P. 17)
●
Is the CRW-F1UX drive connected properly to the computer with the USB cable?
Check that the USB cable is fully connected to the CRW-F1UX drive and the
computer. (P. 14, 16)
●
Is the USB port recognized properly by the operating system?
Follow the instruction for the USB 2.0 interface card or the computer, and check that
the USB port is recognized by the operating system properly.
If not, refer to the instruction for the USB 2.0 interface card or the computer. If the
USB port is still not recognized, there may be a problem with the device driver or
elsewhere. Contact the manufacturer of the USB interface card or the computer.
Refer to the YAMAHA CD-R/RW Drive website for the latest support information,
including the troubleshooting guide.
YAMAHA CD-R/RW Drive website
URL: http://www.yamaha.co.jp/english/product/computer/
Europe
URL: http://www.yamaha-it.de/
Continued on next page