Filter
Top Products
ENGLISH
10 MY8-SDI-D Owner’s Manual
■ Dip Switches (SW2)
A Emu Switch
If you set this switch to ON and the Native switch to OFF, the host device will
recognize the card as a Yamaha MY8-AD96 AD card.
B Native Switch
If you use the card in a future host device that supports the Native mode, setting
this switch to ON and the Emu switch to OFF will enable you to make best use of
the MY8-SDI-D function.
Emu/Native Switch Settings
Leave the RSVD and TEST switches set to OFF. Otherwise, the unit will not
operate properly.
Emu Native Function
ON OFF MY8-AD96 Emulation mode
OFF ON MY8-SDI-D Native mode
ON ON Reserved
OFF OFF Reserved
About the Word Clock Settings
You cannot assign the MY8-SDI-D as the master clock.
If you need to synchronize the host device to a house sync signal (external digital
system), use the WORD CLOCK IN connector to set the master clock of the host
device to WORD CLOCK IN.
ON
1234567
SW2
ON
Emu
Native
RSVD
TEST
ON
1234
OFF
2
1