Filter
Top Products
R Remote Operation Manual 6
Connect the computer and R series units
Use an Ethernet cable to connect the computer and the R series units.
If you selected DAISY CHAIN in “
Settings on the R series units" on the previous page, connect the
Dante connectors of the R series units in a daisy chain to the computer.
If you selected REDUNDANT in
"Settings on the R series units" on the previous page, connect the
computer to the network switch that is connected to the Dante [PRIMARY] connector.
Power-on the R series units
Power-on the R series units. If you power-on before making
"Settings on the R series units", the
settings will not be applied.
Accessing the Control Panel
The way to access the Control Panel will depend on your operating system.
Windows 7
Select [Start] → [Control Panel].
Windows 8 / Windows 8.1
1. In the Start screen, click [Desktop].
The desktop will appear.
2. Move the cursor to the upper right or lower right corner of the desktop.
The Charms bar will appear.
3. Select [Settings] → [Control Panel].