Filter
Top Products
26
● The UX16 does not operate correctly, or no sound is heard.
• Did you install the driver? (page 9)
• Are the USB cable, MIDI cables, and audio cables connected correctly?
(page 8)
• Is the volume setting of the tone generator, playback device, and applica-
tion program set to the appropriate level?
• Is the HOST SELECT switch on the tone generator set to “MIDI”?
• Have you selected an appropriate port in the sequence software?
● Playback response is delayed.
• Does your computer satisfy the system requirements? (page 24)
• Is any other application or device driver running?
[Macintosh]
→ Turn off virtual memory.
→ Disable AppleTalk.
● Cannot suspend or resume the computer correctly.
• Do not suspend the computer while the MIDI application is running.
• If you are using Windows 2000, it may not be possible to suspend/resume,
depending on your USB host controller and other aspects of your system.
(Even if this occurs, the UX16 will operate correctly if you re-connect the
USB cable.)