Filter
Top Products
Doc# 27-0001UM Issued 7/99 Rev. 1.2
DOUBLE (SPLIT) SCREEN IMAGE Make sure the graphics card is set
to Non-Interlaced mode.
Make sure the input signals are
within the LCD monitors specified
frequency range. (Maximum: VESA
1024x768/75Hz, MAC 1024x768/
75Hz)
Connect the video cable securely.
Try the LCD monitor with another
power source.
Press only one button at a time.
ENTIRE SCREEN IMAGE ROLL
(SCROLLS) VERTICALLY
CONTROL BUTTONS DO NOT
WORK
NOTE: The LCD contains over
2,359,926 thin-film
transistors (TFTs). A small
number of missing,
discolored or lighted dots on
the screen is an intrinsic
characteristic of TFT LCD
technology and is not a LCD
defect. If a fixed pattern is
displayed for more than 10
hours, its image may
remain on the screen in
overlap mode when
something else is displayed.
Troubleshooting
21