Basic Settings
Chapter 3 Basic Settings
Default Factory Settings
We’ll elaborate the ZMAX-8210 default factory settings. You can re-acquire these parameters by resort
button. If necessary, please refer to the “the way to restore default factory settings.
Table 1 ZMAX-8210 Default Factory Settings
Feature Factory Default Settings
User Name admin
Password password
Device Name
Devicexxxxxx(xxxxxx represents the last 6 digits of
MAC address)
Spanning Tree Protocol Enable
IP Type:STATIC
IP Address:192.168.1.1
Subnet Mask:255.255.255.0
Default Gateway:0.0.0.0
IP Settings
Primary/Second DNS Server:0.0.0.0
HTTP Redirect Disable
Base Station ID:01020304050D
Dual-Direction Voice:TDD
Bandwidth:7MHz
Encryption:Disable
Wireless Settings
IR Bit: 0
SSH Disable
SNMP:Enable
Trap Server:192.168.0.254
Read Community:public
SNMP
Write Community:private
How to Login Your ZMAX-8210 via WEB Browser
ZMAX -8210 provides you with user-friendly web-based management. Take the following steps
Enter the ZMAX-8210 via IE. When entering the IP address: http://192.168.1.1, you’ll see a popup
menu below:
Chapter 3
- 8 -