Filter
Top Products
Click“Upload”to enable the file to be loaded to your ZMAX-8210.
Reboot your ZMAX-8210 and check whether the firmware has been upgraded in the Basic
Information.
Upgrade firmware via FTP
Enter the command ftp 192.168.1.1，admin and password.
After successful commanding, enter“put mercury.rmt”. If the upgrade is successful, the
information will be shown as below.
The ZMAX-8210 will be forced to reboot.
Warnin
g
：
C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 (vsFTPd 1.1.3)
User (192.168.1.1:(none)): admin
331 Please specify the password.
Password:
230 Using binary mode to transfer files. Login successful. Have fun.
ftp> put mercury.rmt
200 PORT command successful. Consider using PASV.
150 Ok to send data.
226 File receive OK.
ftp: 发送 4075528 字节，用时 0.39Seconds 10423.35Kbytes/sec.
ftp> quit
221 Goodb
y
e.
When upgrading the firmware via FTP, the file name shall be mercury.rmt.
When upgrading, neither the ZMAX-8210, nor other devices connected to the
infrastructure are allowed to be closed.
Backup and Retrieve
It is strongly recommended that you’d better back up some important files in case of something
unexpected. If tragedy hits the ZMAX-8210, you have access to restore the important files by the
backup. The ZMAX-8210 provides two ways to restore the backup.
Backup and Retrieve Files via Web ：
Chapter 5
- 22 -