Filter
Top Products
FOREWORD
This manual provides installation and operation information for the LP 2844 and the TLP 2844
series printers, manufactured by Zebra Technologies Corporation, Camarillo, California.
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation. This docu
-
ment and the information contained within is copyrighted by Zebra Technologies Corporation and
may not be duplicated infull or inpart by any person withoutwritten approval from Zebra Technol
-
ogies Corporation. While every efforthas been made to keep the informationcontained within cur
-
rent and accurate as of the date of publication, no guarantee is given or implied that the document
is error-free or that it is accurate with regard to any specification. Zebra Technologies Corporation
reserves the right to make changes, for the purpose of product improvement, at any time.
TRADEMARKS
LP 2844 and TLP 2844 are service marks of Zebra Technologies Corporation. Windows and
MS-DOS are registered trademarks of Microsoft Corp. All other marks are trademarks or registered
trademarks of their respective holders.
LP 2844 and TLP 2844 Thermal Printers
European Council Directive Compliance to Standards
89/336/EEC EMC Directive EN 55022-B 1998 RF Emissions control
EMC Directive EN 55024 1998
Immunity to Electro-
magnetic Disturbances
92/31/EE EMC Directive EN 61000-3-2 Harmonic Emissions
92/31/EE EMC Directive EN 61000-3-3 Voltage Variation
CB Scheme
EN 60950 1991
A1, A2, A3, A4
Safety
FCC - DECLARATION OF CONFORMITY:
Models: LP 2844 and TLP 2844 conform to the following specification:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a) Class B
digital device
Supplemental Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following Two
Conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada ICS-003 class B requirements.
Cet equipement est conforme a l’ICS-003 classe B de la norm Industrielle Canadian
980348-001 Rev. A iii