Filter
Top Products
Cleaning
Cleaning the Printhead
980590-001 Rev. A P100i User’s Manual 43
Cleaning the Printhead
Use of the cleaning cards will normally do an adequate job of cleaning the printer. However, a
separate Printhead cleaning, using swabs, can remove more stubborn deposits when print
anomalies persist. To avoid deposits, only use foam-tipped swabs.
1. Place the printer power switch in the OFF (O) position.
2. Open printer lid by pressing cover release button, and open cover fully to reveal the
Printhead mounted to inside of the cover.
3. Clean the Printhead by moving alcohol-moistened swab tip side-to-side across Printhead
elements. Only use moderate force.
4. Allow two to three minutes for the Printhead to dry before placing the printer power
switch in the ON ( | ) position.
5. To reorder swabs, reference the P100i Printer Media List.
Caution • Never use a sharp object to scrape deposits from the Printhead. Permanent
damage to the Printhead will result