Filter
Top Products
O-6
UMAN-EN2+
CONTROLS
Keypad Functions
Feed Switch:
Advances media to
next label or sense
mark without printing.
On switch:
momentary on action
turns printer on
Off switch: turns
printer off.
Power Light:
Indicates
Printer is
turned on
Status Light: Steady
light indicates printer is
either out of media, or
head release latch is
open.
Flashing during data
transmission between
host and printer
indicates normal
wireless operation.
Low Battery Light:
Flashes when battery is
near its shut-off voltage.
Steady light indicates
battery must be
recharged or replaced.
Self Test
The Encore 2 can perform a self test which will print a
solid black line to insure all elements of the print head are
working, and then print out the version of software loaded
in the printer. Refer to the Troubleshooting section for
more details on interpreting the self-test.
The self test is activated by the following key sequence:
1. Press the "FEED" key
2. While still holding down the "FEED" key, turn on
the printer by pressing and releasing the "ON" key.
3. Release the "FEED" key
The Encore 2 will perform the self test and then remain
on.