Filter
Top Products
42 P120i Card Printer User Guide 980504-001 Rev. A
P120i Printer Setup
Loading Cards
4. Holding the card deck by the sides, hold it vertically against a flat surface such as a desktop. If the
deck is too thick for your hand to hold it comfortably, use about half a deck at a time.
5. Push the stack back and forth to an angle of about 45° from vertical, so as to separate all of the
cards.
6. Restore the card stack to its original squared-off condition, and place the cards in the input hopper.
7. Place stack of up to 100 cards into card feeder and close the card feeder cover. When card feeder
cover is closed, the card guide locking mechanism will automatically be released.
980504-03-04
CARD FEEDER
COVER
CARD
STACK
CARD
FEEDER