Filter
Top Products
Installing the BitStorm 4800 Express on a Wall
4821-A2-ZN21-30 BitStorm 4800 Express Model 4821-A2 Installation Guide
21
Installing the BitStorm 4800 Express on a Wall
Wall mounting requires two wood screws suitable for the weight of the fully
cabled unit. These are not included. Use at a minimum 1/4-inch (6 mm)
diameter screws in 3/4-inch (19 mm) plywood (not drywall).
To install the BitStorm 4800 Express on a wall:
1 Identify the 6-32 x 3/16-inch flat-head screws provided in the hardware
kit and the brackets suitable for a 23-inch rack. Two screws are required
for each bracket.
2 Orient the unit so that the bottom is facing you and the faceplate is at the
top.
3 Locate the supplied Right Side mounting bracket and fasten it to the right
side of the unit.
4 Locate the supplied Left Side mounting bracket and fasten it to the left
side of the unit.
5 Tighten all screws firmly.
05-17634