Filter
Top Products
Cabling
32 BitStorm 4800 Express Model 4821-A2 Installation Guide 4821-A2-ZN21-30
Connecting to Power
The BitStorm 4800 Express can be powered by any AC power source
supplying 90–265 VAC at 47–63 Hz.
To connect the BitStorm 4800 Express to a power source:
1 Insert the supplied power cord into the power socket on the back of the
unit.
2 If the BitStorm 4800 Express is in a rack, dress the power cord to the left
and fasten it to the rail with a cable tie.
3 Connect the other end of the power cord to a grounded AC power source.
4 Make sure the STATUS LED on the front panel is ON (green). See
Chapter 3-, LEDs.
02-17248