Filter
Top Products
BitStorm 4800 Express Startup Procedure
4821-A2-ZN21-30 BitStorm 4800 Express Model 4821-A2 Installation Guide
39
BitStorm 4800 Express Startup Procedure
You can initialize your BitStorm 4800 Express via a PC or terminal connected
to the unit’s CONSOLE port. Then, using a series of CLI commands,
GrandVIEW EMS or another Element Management System, or the web
interface, you can configure the unit according to your requirements.
Login
To log in to the BitStorm 4800 Express:
1 Connect a PC or terminal to the CONSOLE port. (See Console Port in
Chapter 2-, Cabling.)
2 At the login> prompt, type admin and press Enter.
3 At the password> prompt, press Enter. The default login password is
blank.
4 At the PDYN> prompt, type privilege and press Enter.
5 At the password# prompt, press Enter. The default privileged password is
blank.
You are now logged on and in privileged mode, which allows you to configure
the unit.
Management Modes
The startup procedure for the BitStorm 4800 Express system differs
depending on the type of management used:
z Inband Management – Operates over the uplink.
z Out-of-Band Management – Operates over Port 1.