Filter
Top Products
56K External Modem
QUICK START
This Quick Start describes external modem installation for
personal computers using Windows 95, 98, Me, 2000, XP,
and NT 4.0. Your modem also works with almost any
computer or terminal with a serial (RS-232) port, including
most Windows 3.x, Macintosh, and Linux computers. You
should consult your full-length manual if you have one of
these other systems. The manual is located on the CD.
Please make sure you have the following items: modem,
telephone cord, power supply, and installation and
communications software on diskette(s) or CD-ROM. In some
countries, you may also need a country-specific telephone
adapter to attach your modem to the telephone wall jack.
Depending on your modem model, your package may or may not
include a faxmodem-to-computer serial cable. If it doesn’t, make
sure that you have a serial cable that mates with the connector
on your particular computer.
Important – If your computer already has an
internal PCI modem installed
You should remove the modem and its drivers now. Your old
modem may interfere with the installation of your new modem.
Please refer to page 5 now.
Windows NT 4.0 Users:
Note: Not all models are compatible with NT. See your box for
operating systems supported.
You need to install your faxmodem hardware before running your
setup software. Skip to page 2, Connecting the Faxmodem.
Windows 95/98/Me/2000/XP Users:
You need to run your setup software before installing your
modem hardware. Continue below.
Insert the enclosed CD in your computer’s CD-ROM drive and
wait for it to auto-run.
If the CD does not auto-run: Right-click My Computer and then
click Explore. In the left panel click on the CD icon of the drive
that has your modem CD in it. In the right panel, double-click
Setup or Setup.exe.