Filter
Top Products
ZyWALL 10W Internet Security Gateway
7
Activating the Wireless LAN
The wireless LAN is disabled by default. Before you enable the wireless LAN you should configure some
security, for example, setting MAC address filters and/or 802.1X security; otherwise your LAN will be
vulnerable upon enabling it.
Setting MAC filters
Using the SMT Using the Web Configurator
1.
2.
Type 3 in the main menu and press ENTER.
Type 5 in Menu 3 – LAN Setup and press
ENTER. Refer to the User’s Guide to set up
MAC address filters.
1.
2.
Click ADVANCED in the main menu and then
WIRELESS LAN.
Click the MAC Filter tab. Follow the on-line
help to set up MAC filters.
Setting 802.1X Security Using the Web Configurator
Follow the on-line help to set up 802.1X security using the WIRELESS LAN screens.
Enable the Wireless LAN
Using SMT Menu 3.5 Using the Web Configurator
Press SPACE BAR to select Yes in the Enable
Wireless LAN field and press ENTER.
Refer to the User’s Guide to enable WEP and
set up WEP keys.
Menu 3.5 - Wireless LAN Setup
Enable Wireless LAN= Yes
ESSID= Wireless
Hide ESSID= No
Channel ID= CH01 2412MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Edit MAC Address Filter= No
Press ENTER to Confirm or ESC to Cancel:
Select the checkbox
to activate wireless
LAN.
Follow the on-line help
to enable WEP and set
up WEP keys.
Click Apply.