Filter
Top Products
ZyXEL G-162/G-360 User’s Guide
Wireless Security 4-3
5. [Create Keys Manually] Enter WEP key exactly as you did in your access point. Select
the correct encryption level to match your access point. Either 64, 128, or 256-bit. The
encryption level set her must match the encryption level used by your AP/Router.
6. [Key Format] Select either Hex or ASCII to enter the WEP key
a. Manual Input (Hexadecimal): You generate your own WEP Key using
hexadecimal characters (10 characters for 64-bit, 26 characters for 128-bit, 58
characters for 256-bit).
b. ManualIInput (ASCII): You generate your own WEP Key (4 keys maximum) using
ASCII characters (5 characters for 64-bit, 13 characters for 128-bit, 29 characters
for 256-bit)
7. [Crete Keys with Passphrase] a WEP Key is automatically generated as you type in any
PassPhrase of your choice. Use this feature when you have used a Pass Phrase to
generate your WEP key on your access point.
8. [Default Key] the number of default key you select should match the key number you
input.