Filter
Top Products
ZyXEL G-120 User’s Guide
40 Chapter 3 Wireless LAN Network
3.3.1.2 Wireless Client
Start the ZyXEL utility, select Station Mode, and click the Adapter tab. Select the OTIST
check box, enter the same Setup Key as your AP’s and click Save.
3.3.2 Starting OTIST
Note: You must click Start in the AP OTIST web configurator screen and in the
wireless client(s) Adapter screen all within three minutes (at the time of
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.
See the user’s guide for more information.
1 In the AP, a web configurator screen pops
up showing you the security settings to
transfer. After reviewing the settings, click
OK.
2 This screen appears while OTIST settings are being transferred. It closes when the
transfer is complete.