M-302 User’s Guide
54 Chapter 6 Troubleshooting
6.3 Problems Communicating With Other Computers
Table 20 Troubleshooting Communication Problems
PROBLEM CORRECTIVE ACTION
The computer with
the M-302
installed cannot
communicate with
the other
computer(s).
In Infrastructure Mode
• Make sure that the AP and the associated computers are turned on and
working properly.
• Make sure the M-302 computer and the associated AP use the same SSID.
• Change the AP and the associated wireless clients to use another radio
channel if interference is high.
• Make sure that the computer and the AP share the same security option and
key. Verify the settings in the Profile Security Settings screen.
• If you are using WPA(2) or WPA(2)-PSK security, try changing your encryption
type from TKIP to AES or vice versa.
In Ad-Hoc Mode
• Verify that the peer computer(s) is turned on.
• Make sure the M-302 computer and the peer computer(s) are using the same
SSID and channel.
• Make sure that the computer and the peer computer(s) share the same
security settings.
• If you are using WPA(2) or WPA(2)-PSK security, try changing your encryption
type from TKIP to AES or vice versa.
• Change the wireless clients to use another radio channel if interference is high.