Filter
Top Products
Chapter 17 QoS
User’s Guide
198
Source / Destination
Address Enter the source IP address in dotted decimal notation.
Subnet Mask Enter the source subnet mask.
Port Range Enter the beginning and ending port numbers. You can use the same
number in both fields to indicate a single port, or you can enter 0 in
both fields to indicate all ports.
Exclude Select this to use the class to exclude packets based on these
settings.
Others
Service Select a pre-configured service for this class. Options are: SIP, FTP
and H.323.
This loads pre-configured values specifically for these service types.
Protocol Select a protocol. Options are: TCP, UDP and User Defined.
Exclude Select this to use the class to exclude packets based on these
settings.
Apply Click this button to save your changes back to the WiMAX Modem.
Cancel Click this button to begin configuring this screen afresh.
Table 74 QoS Class Setup (continued)
LABEL DESCRIPTION