Filter
Top Products
User’s Guide
99
CHAPTER 9
The System Configuration
Screens
9.1 Overview
Click ADVANCED > System Configuration to set up general system settings,
change the system mode, change the password, configure the DDNS server
settings, and set the current date and time.
9.1.1 What You Can Do in This Chapter
•The General screen (Section 9.2 on page 101) lets you change the WiMAX
Modem’s mode, set up its system name, domain name, idle timeout, and
administrator password.
•The Dynamic DNS screen (Section 9.3 on page 102) lets you set up the WiMAX
Modem as a dynamic DNS client.
•The Firmware screen (Section 9.4 on page 104) lets you upload new firmware
to the WiMAX Modem.
•The Configuration screen (Section 9.5 on page 106) lets you back up or
restore the configuration of the WiMAX Modem.
•The Restart screen (Section 9.6 on page 107) lets you restart your WiMAX
Modem from within the web configurator.
9.1.2 What You Need to Know
The following terms and concepts may help as you read through this chapter.
System Name
The System Name is often used for identification purposes. Because some ISPs
check this name you should enter your computer's "Computer Name".
• In Windows 2000: Click Start > Settings > Control Panel and then double-
click the System icon. Select the Network Identification tab and then click
the Properties button. Note the entry for the Computer Name field and enter
it as the System Name.