Filter
Top Products
Chapter 9 DHCP Server
NBG-418N User’s Guide
100
9.6 Client List Screen
The DHCP table shows current DHCP client information (including IP Address, Host Name and
MAC Address) of network clients using the NBG-418N’s DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click
Network > DHCP Server > Client List.
Note: You can also view a read-only client list by clicking the DHCP Table (Details...)
hyperlink in the Status screen.
The following screen displays.
Figure 71 Network > DHCP Server > Client List
The following table describes the labels in this screen.
Table 44 Network > DHCP Server > Client List
LABEL DESCRIPTION
# This is the index number of the host computer.
IP Address This field displays the IP address relative to the # field listed above.
Host Name This field displays the computer host name.
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network)
is unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned at the factory. This address follows an industry standard that ensures no
other adapter has a similar address.
Reserve Select this check box in the DHCP Setup section to have the NBG-418N always
assign the IP address(es) to the MAC address(es) (and host name(s)). After you click
Apply, the MAC address and IP address also display in the Advanced screen (where
you can edit them).
Apply Click Apply to save your settings.
Refresh Click Refresh to reload the DHCP table.