Filter
Top Products
Chapter 6 Wireless LAN
NWA1121-NI User’s Guide
78
6.6.2.2 Wireless Client
Use this screen to use 802.1x-Only security mode for your NWA1121-NI that is in wireless client
operating mode. Select 802.1x-Only in the Security Mode field to display the following screen.
Figure 30 Security: 802.1x Only for Wireless Client
The following table describes the labels in this screen.
Reauthentication
Time
Specify how often wireless stations have to resend user names and passwords in order
to stay connected.
Enter a time interval between 100 and 3600 seconds. Alternatively, enter “0” to turn
reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Enable Group-Key
Update
Select this option to have the NWA1121-NI automatically disconnect a wireless station
from the wired network after a period of inactivity. The wireless station needs to enter
the user name and password again before access to the wired network is allowed.
Enter a time interval between 100 and 3600 seconds.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 17 Security: 802.1x Only for Access Point (continued)
LABEL DESCRIPTION
Table 18 Security: 802.1x Only for Wireless Client
LABEL DESCRIPTION
Security Settings
Profile Name This is the name that identifying this profile.