Filter
Top Products
Chapter 6 Wireless LAN
NWA1121-NI User’s Guide
81
Key 1 to
Key 4
The WEP keys are used to encrypt data. Both the NWA1121-NI and the wireless stations
must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
You can configure up to four keys, but only one key can be activated at any one time.
Rekey Options
Reauthentication
Time
Specify how often wireless stations have to resend user names and passwords in order to
stay connected.
Enter a time interval between 100 and 3600 seconds. Alternatively, enter “0” to turn
reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the reauthentication
timer on the RADIUS server has priority.
Enable Group-Key
Update
Select this option to have the NWA1121-NI automatically disconnect a wireless station
from the wired network after a period of inactivity. The wireless station needs to enter the
user name and password again before access to the wired network is allowed.
Enter a time interval between 100 and 3600 seconds.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 19 Security: 802.1X-Static WEP for Access Point (continued)
LABEL DESCRIPTION