Filter
Top Products
P-2002 Series User’s Guide
44 Chapter 4 Ethernet Screens
4.3 Configuring the Ethernet Management Port
Click ETHERNET in the navigation panel and then Mgnt Port to open the following screen.
Use the ETHERNET Mgnt Port screen to configure a static IP address through which you
can manage the Prestige.
Note: The management port is a separate logical Ethernet interface that you can
access from a computer connected to either of the Prestige’s physical Ethernet
interfaces.
Figure 13 ETHERNET Mgnt Port
The following table describes the labels in this screen.
Note: The management port’s subnet mask is fixed at 255.255.255.0.
Table 9 ETHERNET Mgnt Port
LABEL DESCRIPTION
IP Address Type the (static) IP address through which to manage the Prestige. This
management IP address can be on a different subnet from the Ethernet port’s IP
address, but the computer you use for management must be on the same subnet
as this management IP address.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.