Filter
Top Products
P-334WT
12
System Name is a unique name to
identify the Prestige in an Ethernet
network. Enter a descriptive name.
The Domain Name entry is what is
propagated to the DHCP clients on the
LAN. If you leave this blank, the
domain name obtained by DHCP from
the ISP is used.
Click Next to continue.
2.
Use the second wizard screen to set up the wireless LAN.
Name(SSID) is a unique name to identify
the Prestige in the wireless LAN. Enter a
descriptive name.
The range of radio frequencies used by
IEEE 802.11b/g wireless devices is
called a channel.
Select a channel ID that is not already in
use by a neighboring device.
Click None, Basic(WEP) or Extend(WPA-PSK) from the drop-down list box as the level of wireless security.
Choose None to have no wireless LAN security configured. If you do not enable any wireless security on your Prestige, your
network is accessible to any wireless networking device that is within range.
Choose Basic(WEP) security if you want to configure WEP Encryption parameters.
Choose Extend(WPA-PSK) security to configure a Pre-Shared Key. Choose this option only if your wireless clients support
WPA-PSK.
The third screen varies depending on which security level you select.
The wireless stations and Prestige must use the same SSID, channel ID and WPA-
PSK (if WPA-PSK is enabled), WEP encryption key (if WEP is enabled) for wireless
communication.
3. Choose Basic(WEP) security in the previous screen to setup WEP Encryption parameters.