Filter
Top Products
PES-1014 User’s Guide
System Parameters A
Appendix A
System Parameters
System Parameters
CATEGORY DEFAULT
VALUE
OPTIONS NOTE
System
System Info.
Device Name N/A 1-255 characters Give the system a name (case-sensitive)
Device Location N/A 1-255 characters Indicate the location of the system (case-sensitive)
Contact N/A 1-255 characters Name of the person to contact for help (case-sensitive)
System Configure
SuperMAC disable enable/disable The capability to use an aggressive backing off algorithm
as collisions occur.
Aging Control enable enable/disable Capability to age the entries in the dynamic learning
address table
Aging Time 10 min. 0-30 min. The time period a source MAC address can stay in the
address table
Broadcast Storm
Control Threshold
48
16,32,48,64 Limits the number of consecutive broadcast packets
received by the switch
Panel-Refresh
Time Interval
10 sec. 1-60 sec. Refresh time interval of the switch panel
Counter-Refresh
Time Interval
10 sec. 1-60 sec. Refresh time interval of the switch counter
Port Monitoring
Monitored Port ID N/A any one port A port to be monitored for its incoming and outgoing
packet flow
Snooping Port for
incoming packet
flow
N/A a port except the
monitored port
Assign a port to snoop the monitored port's incoming
packet flow
Snooping Port for
outgoing packet
flow
N/A a port except the
monitored port
Assign a port to snoop the monitored port's outgoing packet
flow
Status unchecked checked/unchecked To activate/deactivate the function of the snooping port
Networking
IP Address N/A Device IP The IP addresses of the devises included in the network
Subnet Mask N/A Device IP Mask Set up a subnet mask
Default Gateway N/A Default Gateway A gateway IP is used for the switch to connect to a non-
local IP