Filter
Top Products
PLA450 User’s Guide
111
CHAPTER 12
Configuration Mode
Click Maintenance > Config Mode to open the following screen. This screen allows you to
hide or display the advanced screens of some features or the advanced features, such as MAC
filter. Basic is selected by default and you cannot see the advanced screens or features. If you
want to view and configure all screens including the advanced ones, select Advanced and
click Apply.
Figure 64 Maintenance > Config Mode > General
The following table describes the labels in the screen.
The following table lists the screens that you can view and configure only when you select
Advanced.
Table 34 Maintenance > Config Mode > General
LABEL DESCRIPTION
Configuration Mode
Basic Select Basic mode to enable or disable features and to monitor the status of your
device.
Advanced Select Advanced mode to set advanced settings.
Apply Click on this to set the mode.
Reset Click on this to reset your selection to the default (Advanced).
Table 35 Advanced Configuration Options
CATEGORY LINK TAB
Network Wireless LAN MAC Filter
Advanced
QoS
Maintenance Logs Log Settings