Filter
Top Products
Chapter 5 Wireless Tutorial
PLA450 User’s Guide
53
3 Give the profile a descriptive name (of up to 32 printable ASCII characters). Select
Infrastructure and either manually enter or select the AP's SSID in the Scan Info table
and click Select.
4 Choose the same encryption method as the AP to which you want to connect (In this
example, WPA-PSK).
Figure 23 ZyXEL Utility: Profile Security
5 This screen varies depending on the encryption method you selected in the previous
screen. Enter the pre-shared key and leave the encryption type at the default setting.
Figure 24 ZyXEL Utility: Profile Encryption
6 In the next screen, leave both boxes checked.
Figure 25 Profile: Wireless Protocol Settings.
7 Verify the profile settings in the read-only screen. Click Save to save and go to the next
screen.