Filter
Top Products
Chapter 1 Introduction
PMG1006-B20A User’s Guide
7
1.5 The Reset Button
If you forget your password or cannot access the Web Configurator, you will need to use the RESET
button at the back of the GPON Device to reload the factory-default configuration file. This means
that you will lose all custom configuration and the password will be reset to the default.
1.5.1 Using the Reset Button
1 Make sure the POWER LED is on (not blinking).
2 To set the GPON Device back to the factory default settings, press the RESET button for more than
three seconds and then release it. The LEDs flash and the GPON Device restores the defaults and
restarts.
Note: Press the RESET button for less than one second to restart the GPON Device
without changing it back to the factory default settings.