5225 StudioSampler_M 96 2,2
w Switch-able in, switch-able out.
{SEY} Select config parameters to adjust mono/stereo operation, scrubmode and trigger delays. Press trig EQ to make
play trigger frequency conscious. Pressing trig EQ again will bring up main trigger page found under main menus. Use
middle SELECT key to toggle controls ON/OFF. A MIDI keyboard can be used to emulate a keyboard sampler -
disabling input monitor will speed up response. This preset allows one 87 second stereo sample, or one 174 second
mono sample at 48k. Stereo in, stereo out.
5226 StudioSampler_S 96 2,2
w Stereo in, stereo out.
{SEY} Select config parameters to adjust mono/stereo operation, scrubmode and trigger delays. Press trig EQ to make
play trigger frequency conscious. Pressing trig EQ again will bring up main trigger page found under main menus. Use
middle SELECT key to toggle controls ON/OFF. A MIDI keyboard can be used to emulate a keyboard sampler -
disabling input monitor will speed up response. This preset allows one 87 second stereo sample, or one 174 second
mono sample at 48k. Stereo in, stereo out.
5227 Triggered Reverse 96 2,2
{S} Hit trigger once to record again to play back in reverse. Stereo in, stereo out.
5228 Varispeed Sampler 96 2,2
[VS]{S} This preset gives a very high quality simulation of a varispeed tape recorder, with a range from 15%% to
400%%. For those applications where tempo and duration are flexible, it maybe used as a higher quality alternative to
a pitch shifter. Fine speed and pitch controls are provided. It allows one 87 second stereo sample at 48k. Stereo in,
stereo out.
5229 Vocalflyer_M 96 2,2
w Summed in, mono out.
5230 Vocalflyer_S 96 2,2
w Stereo in, stereo out.
[V]{SEY} Single take Sampler with post sample dynamics package (Comp/De-ess). IMPORTANT ! Recording with this preset
will clear sample memory.
53 Sampler - Small
The small delay-based sampler module is featured here. This is a small mono sampler that uses delay
memory rather than sampler memory, meaning that it can be used in either (or both) machine A or
machine B.
5310 Kick/SnareReplacer2 96 2,2
[D]{SDCEY} All the tools you need for kick & snare replacement when mixing. This one uses DLYSAMP and can be loaded in
either (DSP engine). Load your samples via Input#1(kick) & input#2 (snare). After editing your samples, use trigger
sources from the 'sync' head and adjust <predelay> to syncronize sample playback with track, adjusting to account for
the difference in time between sync and repro heads. Delay feeds the pre-trig filter to refine the input to a noisegate,
which feeds the playback trigger. When dynamics switch is set to on, adjust peak detect and dynamics parameters to
have sample playback follow input dynamics. Dual mono in, dual mono out.
5311 Small Sampler 96 4,4
w Quad in, quad out.
5312 Small Sampler8 96 || 8,8
w Octal in, octal out.
5312 Small Sampler8 48 8,8
w Octal in, octal out.
{S} This is a simple re-triggerable sampler.
The H8000 Presets Collection
Release 1.2 Page 79 of 109 12/30/2003
