13
S4500THS User Guide Portable Printing Solutions
Extech Instruments Corporation 285 Bear Hill Road, Waltham, MA 02451-1064 Phone: 1-877-4-EXTECH (439-8324) Fax: (781) 890-7864 Web site: www.extech.com
Copyright © 2005 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
3.7.2 PRINTER FONT COMMANDS – COURIER CHARACTER SET:
Font Name Character size (W x H) Command String
24 CPI normal 8x23 ESC+'k'+'5'
21 CPI normal
9x23 ESC+'k'+'4'
19 CPI normal
10x23 ESC+'k'+'3'
16 CPI normal
12x23 ESC+'k'+'2'
12 CPI normal
16x23 ESC+'k'+'1'
13 CPI rotated
14x16 ESC+'k'+'0'
3.7.3 PRINTER FONT COMMANDS:
Command String Printer Action
ESC - ‘F’ – 1 Selects International character set
ESC - ‘F’ – 2 Selects PC Line Draw character set
ESC - ‘U’ - ‘1’ Enable emphasized print.
ESC - ‘U’ - ‘0’ Disable emphasized print.
3.7.4 PRINTER GRAPHIC COMMANDS:
Command String Printer Action
ESC - ‘a’ – n Select dot line spacing between printed lines.
ESC - ‘J’ – n Graphic Line Feed command
ESC - ‘P’ - ‘#’ Select Online mode, characters printed as received.
ESC - ‘P’ - ‘$’ Select Buffer mode, characters are printed on (^ D)
ESC - ‘V’ - n1 – n2 8-bit Graphic command
ESC - ‘v’ - n1 – n2 RLE Compressed Graphic command
3.7.5 MAGNETIC CARD READER CONTROL COMMANDS:
Command String Printer Action
ESC - ‘M’ - ‘nnm’ - Cr Select MCR with (nn) auto timeout
ESC – ‘C’ Cancel MCR read process
3.7.5.1 SMART CARD READER CONTROL COMMANDS (WHEN SCR IS INSTALLED):
Command String Printer Action
ESC - ‘M’ - ‘nn’ - ‘7’- Cr Select SCR in direct mode with Serial RS232.
(nn) is the auto timeout of the SCR.
ESC - ‘M’ - ‘nn’ - ‘8’- Cr Select SCR in PassThru mode with BT/802.11 or IrDA on.
(nn) is the auto timeout of the SCR.
