A SERVICE OF

logo

Using the Front Panel
Navigation Examples
2-26
Changing the Drying Time
This example adjusts the drying time, a setting used to suit different environmental
conditions, in the
DRYING TIME menu. The printer must be in full menu mode for
this example.
Make sure the
STATUS display level is shown on the front panel.:
1 Press the Enter key to enter the menu system.
Either the
SHORT MENUS screen or the FULL MENUS screen is displayed with the
Queueing & Nesting option. If necessary, see page 2-16, Selecting the Full Menu
Mode, to change to Full Menu mode.
2 Press the key or the key until the
Device Setup menu is displayed.
3 Press the Enter key.
4 Press the key or the key until
DRYING TIME is displayed.
C4704034
STATUS
Ready
C4704034
FULL MENUS
Queueing & Nesting
C4704034
FULL MENUS
Device Setup
C4704034
DEVICE SETUP
Lang=Automatic
C4704034
DEVICE SETUP
Drying time=Automatic