Control panel
message
Description Recommended action
LOAD TRAY X
<TYPE> <SIZE>
alternates with
To use another tray
press the Select
button on the printer
front panel.
Tray X is either empty or configured for a
type and size other than what is specified
in the job.
Press ? for help.
or
Press press the Select button on the
printer front panelto print from another tray.
See Configuring trays for more information.
LOAD TRAY X
<TYPE> <SIZE>
alternates with
For help press ?
Tray X is either empty or configured for a
type and size other than specified in the
job. No other tray is available.
Press ? for help.
or
See Configuring trays for more information.
MANUALLY FEED
OUTPUT STACK
alternates with
Then press the
Select button on the
printer front panel to
print second sides
The first side of a manual 2-sided print job
has been printed and the printer is waiting
for the output stack to be inserted for the
second side to be printed.
Take the output stack out of the output bin
and reinsert it in Tray 1 to print the second
side of the 2-sided print job.
If no paper is in the
manual feed tray:
MANUALLY FEED
<TYPE> <SIZE>
alternates with
To continue press
the Select button on
the printer front
panel.
Paper is in Tray 1, but a job sent requires
a specific paper type and size that is not
currently available.
Press the Select button on the printer front
panel to print from the tray.
or
Press ? for help.
or
See Configuring trays for more information.
MANUALLY FEED
<TYPE> <SIZE>
alternates with
For help press ?
Tray 1 is empty and no other tray is
available.
Press ? for help.
or
See Configuring trays for more information.
MANUALLY FEED
<TYPE> <SIZE>
alternates with
To use another tray
press the Select
button on the printer
front panel.
There is no paper in the tray and a print
job sent requires a specific paper type and
size that is not currently available through
Tray 1.
Press the Select button on the printer front
panel to print from another tray. See
Configuring trays for more information.
or
Press ? for help.
Moving solenoid
alternates with
To exit press
STOP key
The printer is executing a Component Test
and the component selected is Solenoid.
No action necessary.
Moving solenoid
and motor
alternates with
To exit press
STOP key
The printer is executing a Component Test
and the components selected are Solenoid
and Motor.
No action necessary.
32 Technology background information Software Technical Reference ENWW
