A SERVICE OF

logo

10
Installation
2.4 Conrming Main and Sub settings
NOTE • When
Intelligent Stack
is in use, only Main will be able to receive
remote control signals. Sub will not respond to remote control signals.
2. The following dialogs appear on the lower right screen.
Main (Set
B
)
Sub (Set
A
)
3. If you press the ► button, the dialog closes and the Main (Set B) menu will
appear when MAIN is highlighted.
If you press the ◄ button, the dialog closes and the menu will disappear.
NOTE
If these dialogs are not displayed on screen, check the RS-232
connection (
8
) and the MAIN or SUB settings in the STACK MODE dialog.
(
14
)
1. Press the MENU button on the remote control for Main (Set B).