24
Connecting cables
Inputting the image to Sub and Main individually
1.
Split the output signal from your image device into two with a device such as a
signal splitter.
2.
Connect the output ports of the image output device to the same input ports
on the Main and Sub projectors.
NOTES for Simple Stack
•
COMPUTER IN1
and
IN2
can be used as the
input port for the projector that is connected
with a computer cable at its
MONITOR OUT
port. (
Operating Guide
→
SETUP menu
)
If you wish to use other input ports, input the
image to Sub and Main individually.
Inputting the image from Main to Sub
1.
Connect the
MONITOR OUT
port on Main
to the
COMPUTER IN1
port on Sub with a
computer cable.
2.
Connect the image output device to one of
the input ports on Main.
4.2 Connecting signal cables
There are two methods to input an image to the Sub projector (
18, 19
):
- Inputting image from the
MONITOR OUT
port on Main to Sub.
- Inputting an image to Sub and Main individually.
NOTES for Intelligent Stack
•
COMPUTER IN1
and
IN2
can be used
as the input port for the Main projector in
Intelligent Stack. Do not use other ports for
image input.
- You can input component signals to
COMPUTER IN1
and
IN2
.
- You can input video signals to the Y pin of
the component video of
COMPUTER IN1
and
IN2
.
NOTES for Intelligent Stack •
LAN
,
USB TYPE A
and
USB TYPE B
cannot be used as input ports on the Main projector in Intelligent Stack.
NOTES for Simple Stack •
Any of the ports that is compatible with the
signal can be used. Input the same signal to the two projectors individually.
Connection example
in Intelligent Stack
Sub
Main
