FastScan and FlexTest Reference Manual, V8.6_4
2-270
Report Bus Data Command Dictionary
Bidi — A literal that displays the bus data for the bidirectional buses that
have possible contention problems. For the tool to place a bus in this
category, the bidirectional pin must have only a single tri-state driver.
Fail — A literal that displays the bus data for the buses that failed the
contention mutual exclusivity checking.
ABort — A literal that displays the bus data for the buses that aborted
contention mutual exclusivity checking.
Buf — (FastScan Only) A literal that displays the bus data for all buses
that have the buffer learned behavior.
Xor — (FastScan Only) A literal that displays the bus data for all buses
that have the exclusive OR learned behavior.
Mux — (FastScan Only) A literal that displays the bus data for all buses
that have the multiplexer learned behavior.
AND — (FastScan Only) A literal that displays the bus data for all buses
that have the AND learned behavior.
OR — (FastScan Only) A literal that displays the bus data for all buses
that have the OR learned behavior.
POSS_Mult_dr_on — (FastScan Only) A literal that displays the bus data
for all buses that have a possibility of having multiple drivers turned on at
the same time.
POSS_X — (FastScan Only) A literal that displays the bus data for all
buses that have a possibility of being at an unknown state.
POSS_Z — (FastScan Only) A literal that displays the bus data for all
buses that have a possibility of being at the high-impedance state.
HIstogram — (FastScan Only) A literal that displays a summary of
information identifying the number of buses that are in each of the possible
categories.
ZPass — (FastScan Only) A literal that displays the bus data for the buses
that pass the E11 design rule.
ZFail — (FastScan Only) A literal that displays the bus data for the buses
that fail the E11 design rule check.
