Command Dictionary Command Summary
FastScan and FlexTest Reference Manual, V8.6_4
2-21
Set Possible Credit
••
Specifies the percentage of credit that the tool
assigns possible-detected faults.
Set Procedure
Cycle_checking
••
Enables test procedure cycle timing checking
to be done immediately following scan chain
tracing during design rules checking.
Set Pulse Generators
••
Specifies whether the tool identifies pulse
generator sink (PGS) gates.
Set Race Data
•
Specifies how FlexTest handles the output
states of a flip-flop when the data input pin
changes at the same time as the clock triggers.
Set Rail Strength
•
Specifies FlexTest to set the strongest strength
of a fault site to a bus driver.
Set Ram Initialization
•
Specifies whether to initialize RAM and
ROM gates that do not have initialization
files.
Set Ram Test
•
Specifies the mode for RAM testing with
random or Built-In Self Test (BIST) patterns.
Set Random Atpg
••
Specifies whether the tool uses random
patterns during ATPG.
Set Random Clocks
•
Specifies whether FastScan uses
combinational or clock_sequential patterns
for random pattern simulation.
Set Random Patterns
•
Specifies the number of random patterns
FastScan simulates.
Set Random Weights
•
Specifies the default random pattern
weighting factor for primary inputs.
Table 2-1. Command Summary [continued]
Command
D
F
T
I
F
S
F
T
Description
