FastScan and FlexTest Reference Manual, V8.6_4
2-22
Command Summary Command Dictionary
Set Redundancy
Identification
•
Specifies whether FlexTest performs the
checks for redundant logic when leaving the
Setup mode.
Set Schematic Display
•••
Changes the default schematic display
environment settings for DFTInsight.
Set Screen Display
••
Specifies whether the tool writes the transcript
to the session window.
Set Self Initialization
•
Specifies whether FlexTest turns on/off self-
initializing sequence behavior.
Set Sensitization
Checking
••
Specifies whether DRC checking attempts to
verify a suspected C3 or C4 rules violation.
Set Sequential Learning
••
Specifies whether the tool performs the
learning analysis of sequential elements to
make the ATPG process more efficient.
Set Shadow Check
•
Specifies whether FastScan will identify
sequential elements as a “shadow” element
during scan chain tracing.
Set Simulation Mode
•
Specifies whether the ATPG simulation run
uses combinational or sequential RAM test
patterns.
Set Skewed Load
•
Specifies whether FastScan includes a skewed
load in the patterns.
Set Split Capture_cycle
•
Enables or disables the simulation of level
sensitive and leading edge state elements
updating as a result of applied clocks.
Table 2-1. Command Summary [continued]
Command
D
F
T
I
F
S
F
T
Description
