The default setting for Dispense Mode is On-demand. To
change the setting, follow steps listed under "Finding the
Supply Options." Then follow the steps below.
1. Press until you see
SUPPLY
< Dispense Mode >
2. Press . You will see the previous setting, for example
DISPENSE MODE
< On-Demand
3. Press or until you see the option you want. Then
press . You will see
SUPPLY
< Dispense Mode >
4. Press to exit to the Setup menu.
5. Press to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
Continuous Mode Features
Regardless of the supply type, when you use continuous mode,
the printer dispenses all but the last label or tag to the peel bar.
The last one goes to the tear bar.
Setting Supply Options
3. Setting Supply Options
3-5
