The default setting for Print Position is 0. To change the
setting, follow the steps listed under "Finding the Supply
Options." Then follow the steps below.
1. Press until you see
SUPPLY
<Print Pos>
2. Press . You will see the previous setting, for example
Enter print pos
[+/-999]: +0
3. Use the arrow keys to change the print position. Pressing
increases the value (moves the image up);
decreases it (moves the image down).
4. Press when the number you want is displayed. You
will see
SUPPLY
<Print Pos>
5. Press to exit to the Setup menu.
6. Press to exit to the Main Menu.
NOTE: After changing settings in the Setup Menu, always
return to the Main Menu before turning your
printer off. The printer will not save changes to
these menus if you turn it off before returning to
the Main Menu.
Setting Supply Options
3. Setting Supply Options
3-7
