A SERVICE OF

logo

2. Press . You will see
SETUP
Supply >
3. Press until you see
SETUP
< Port Settings
4. Press . You will see the first communications option.
PORT SETTINGS
Baud Rate >
To change one of these options, follow the instructions under
the correct heading. To exit an option without changing the
setting, press .
Baud Rate
The default setting for Baud Rate is 9600. To change the
setting, follow the steps listed under "Finding Communication
Value Options." Then follow the steps below.
1. Press to set the baud rate. You will see the previous
setting, for example
BAUD RATE
< 2400 >
The options for baud rate are
1200
2400
4800
9600
9406 Operator’s Handbook
4-2