Optimizing Disk and Cache Performance for Traditional Volumes 49
novdocx (en) 6 April 2007
7.5 Configuring Common File System SET
Parameters for NetWare
The SET parameters for Common File System are shared by NSS and Traditional file systems. Table
7-2 indicates the default settings in NetWare 6.5 or later for the Common File System SET
parameters.
IMPORTANT: When modifying Common File System SET parameters, ensure that your planned
settings satisfy the requirements for both your NSS and Traditional volumes.
Table 7-2 Common File System SET Parameters
Dirty Disk Cache Delay Time 3.3 seconds
Minimum File Cache Report Threshold 20
Automatically Repair Bad Volumes On
File Delete Wait Time 5 minutes 29.6 seconds
Allow Deletion Of Active Directories On
Maximum Percent of Volume Space Allowed for Extended Attributes 10
Maximum Extended Attributes per File or Path 16
Purge Files On Dismount Off
Fast Volume Mounts On
Maximum Percent Of Volume Used By Directory 13
Maximum Subdirectory Tree Depth 25
Volume Low Warn All Users On
Volume Low Warning Reset Threshold 256
Volume Low Warning Threshold 256
Turbo FAT Re-Use Wait Time 5 minutes 29.6 seconds
Allow Unowned Files To Be Extended On
Auto Mount Mirrored Volume Containing Inactive Device Off
Common File System SET Parameters Default Value
Maximum Transactions 10000
Maximum Concurrent Directory Cache Writes 75
Minimum File Delete Wait Time 1 minute 5.9 seconds
Immediate Purge Of Deleted Files Off
Compression Daily Check Stop Hour 6
SET Parameters for the Traditional File System Default Value
